Gateway to Metal Casting Resources
HomeDie Casting MapPost Casting    

Foundry Map
Die Casting Map
Research Results to Improve Casting Productivity
Apply for Research Funding
Case Studies and Technology Demonstrations
Reduce Energy Consumption
Training & Workshops
Learn More About the Metal Casting Program




Home | Contact Us

Rapid Heat Treatment of Cast Aluminum Components

ABSTRACT
Technomics received a NICE3 grant to build and operate a full-scale facility for demonstrating to manufacturers, with their own cast aluminum components, an automated in-line heat treating and quenching system. This system uses fluidized bed technology that reduces the time required to achieve heat treatment specifications by 80-90%. The process also reduces nitrous oxide and CO2 process air emissions, energy use, and water and ground pollution from sand casting. Unlike current convection and vacuum systems, this system uses closed-loop air circulation, pulse-fired burners, and direct heating of the energy transfer medium to reduce energy use by rapidly heating individual components to molecular structure alteration temperatures. Energy consumption can be reduced by 90% using this system when compared to conventional heat treating due to the reduction in process time. The pay back for this technology is approximately 1.5 years. Once the full-scale system is fully developed and automated, customers will be able to realize the full productivity enhancement offered by the system.
RELATED REPORTS
PERFORMING ORGANIZATION
Technomics
CONTACT INFORMATION
Lisa Barnett
U.S. Department of Energy
1000 Independence Ave., SW
Washington, DC  20585
website: www.eere.energy.gov/industry/

phone: (202) 586-2212
fax: (202) 586-7114
email: lisa.barnett@ee.doe.gov

EERE logoMetal Casting logo