Gateway to Metal Casting Resources
HomeResearch Results to Improve Ca Die Casting    

Foundry Map
Die Casting Map
Research Results to Improve Casting Productivity
Apply for Research Funding
Case Studies and Technology Demonstrations
Reduce Energy Consumption
Training & Workshops
Learn More About the Metal Casting Program




Home | Contact Us

Ultrahigh Speed Measurement of Internal Die Cavity Temperature Profiles for Process Control and Model Verification

ABSTRACT
Modern die casting technology is evolving toward increased use of computer-assisted diagnostics and control systems in order to improve the quality and cost competitiveness of die castings. These efforts rely on indirect measurements of various machine hydraulic and mechanical parameters in order to infer correlations to the dynamics of the die casting process. Industry has expressed the need for a device that could image the flow in the interior of a die casting die and, if possible, measure the temperature of the part as it is formed in the die cavity. A reliable prototype system has been demonstrated that will capture the time/temperature profile, internal to a die cavity, at sampling rate up to 100KHz. This system is configured around a production aluminum die casting die that was modified to allow the installation of small diameter cylindrical sapphire windows into the cavity. In order to measure the internal die cavity temperatures, radiation passing through the sapphire windows is monitored by a custom designed, high speed, two color ultra-high-speed infrared pyrometer or a high speed IR camera. Either device can be used to measure the temperature at various locations around the die cavity. Based on the these promising preliminary results, it is expected that continued development of this system will offer new possibilities for process control and modeling experimental verification.
RELATED REPORTS
PERFORMING ORGANIZATION
Prince Machine Corporation
CONTACT INFORMATION
Steve Udvardy
North American Die Casting Association
241 Holbrook Drive
Wheeling, IL  60090
website: www.diecasting.org

phone: (847) 279-0001
fax: (847) 279-0002
email: udvardy@diecasting.org

EERE logoMetal Casting logo